Draw

Draw [target,] cmd

target

the buffer to draw on

cmd

a string containing the sequence of commands

Drawing will take place onto the current work page set via ScreenSet or onto the target Get/Put buffer if specified.
The Draw statement can be used to issue several drawing commands all at once; it is useful to quickly draw figures. The command string accepts the following commands:

Commands to plot pixels:

Command	Description
	Commands to plot pixels:
B	Optional prefix: move but do not draw.
N	Optional prefix: draw but do not move.
M x,y	Move to specified screen location. if a '+' or '-' sign precedes x, movement is relative to current cursor position. x's sign has no effect on the sign of y.
U [n]	Move n units up. If n is omitted, 1 is assumed.
D [n]	Move n units down. If n is omitted, 1 is assumed.
L [n]	Move n units left. If n is omitted, 1 is assumed.
R [n]	Move n units right. If n is omitted, 1 is assumed.
E [n]	Move n units up and right. If n is omitted, 1 is assumed.
F [n]	Move n units down and right. If n is omitted, 1 is assumed.
G [n]	Move n units down and left. If n is omitted, 1 is assumed.
H [n]	Move n units up and left. If n is omitted, 1 is assumed.
	Commands to color:
C n	Changes current foreground color to n.
P p,b	PAINTs (flood fills) region of border color b with color p.
	Commands to scale and rotate:
S n	Sets the current unit length, default is 4. A unit length of 4 is equal to 1 pixel.
A n	Rotate n*90 degrees (n ranges 0-3).
TA n	Rotate n degrees (n ranges 0-359).
	Extra commands:
X p	Executes commands at p, where p is a STRING PTR.

Commands to set the color, size and angle will take affect all subsequent Draw operations.

Screen 13 'Move to (50,50) without drawing Draw "BM 50,50" 'Set drawing color to 2 (green) Draw "C2" 'Draw a box Draw "R50 D30 L50 U30" 'Move inside the box Draw "BM +1,1" 'Flood fill with color 1 (blue) up to border color 2 Draw "P 1,2" Sleep

'' Draws a flower on-screen Dim As Integer i, a, c Dim As String fill, setangle '' pattern for each petal Dim As Const String petal = _ _ ("X" & VarPtr(setangle)) _ '' link to angle-setting string _ & "C15" _ '' set outline color (white) & "M+100,+10" _ '' draw outline "M +15,-10" _ "M -15,-10" _ "M-100,+10" _ _ & "BM+100,0" _ '' move inside petal & ("X" & VarPtr(fill)) _ '' flood-fill petal (by linking to fill string) & "BM-100,0" '' move back out '' set screen ScreenRes 320, 240, 8 '' move to center Draw "BM 160, 120" '' set initial angle and color number a = 0: c = 32 For i = 1 To 24 '' make angle-setting and filling command strings setangle = "TA" & a fill = "P" & c & ",15" '' draw the petal pattern, which links to angle-setting and filling strings Draw petal '' short delay Sleep 100 '' increment angle and color number a += 15: c += 1 Next i Sleep

target is new to FreeBASIC
QB used the special pointer keyword VARPTR$ with the X p command.
FB does not currently allow sub-pixel movements: all movements are rounded to the nearest integer coordinate.